Sales: +91-9810112341 | Technical Support: +91-9212268113
Delhi ι Gurgaon
For over five decades, MACHLESS has been in the fore front of manufacturing of Drilling and Tapping machines. MACHLESS always believes in quality. We strive to put the best components and materials so that you can get the best cutting power in your hand. We invite you to make it A CHOICE OF LIFETIME.
These machines are available in bench, pillar and gang type. The machine covers wide range of operations like drilling, reaming, tapping, lapping and counter boring. These machines present a unique combination of metals rigidity and accuracy for both and itís suitability for mass production and tools room jobs.
The drilling head is of heavy duty. It is reinforced and ribbed with cast iron around bores to withstand any distortion while drilling or boring. The bearing surface is precision bored. Internal bores are honed to provide close tolerance for spindle movement. It has a mechanical locking device, which enables the head lobe raised, lowered or swung to any required position.
The Spindle is made of alloy steel. Spindle drives in internally broached sleeve, fitted in deep grooved ball bearings and tapper bearings. Bearings are widely supported and belt tension is not transmitted to spindle. This type of drive ensures a more efficient operation as compared with conventional single key drive.
The accurately machined table surface is provide with slots & can be adjusted vertically at the required height by means of rack and pinion set and it is also capable of revolving fully through 3600. Table can also be tilted to required angle up to maximum 45į both sides (Fig. 1 ).This can be measured with the help of a scale fitted on the rim of the arm. The table holding the arm is held at its place with the help of tapered bolts and cylindrical dowel pin locked in itís place at its base.
The drive to splined is transmitted through a v-belt on stepped pulley. In gear type machine additional slow speeds are obtained by engaging back gear (Fig. 2).All geared model machines are provided with additional heavy duty ball bearing for long life and better load taking capacity in the front area of front machine pulley. These and many more unparallel features are responsible for the super performance and long serving life of MACHLESS products.
SPECIFICATIONS (in mm) Applicable for Drilling Machines & Drilling & Drilling Heads of Gang Drilling Machines.
|Drilling Capacity||12mm simple||15mm simple||15mm geared||20mm simple||20mm geared||25mm geared||32mm geared||40mm geared|
|Spindle Centre lo Column||ó 160||175||180||220||220||260||285||385mm|
|Spindle Nose to Table (Max.)||380||480||580||570||585||715||620||700|
|Spindle Nose to Base (Max.)||395||600||700||760||760||1065||1025||1030|
|Morse Taper in Spindle||As per JUG Drill Chuck||MTó2||MTó2||MTó2||MTó2||MTó3||MTó4||MTó4|
|Table Size||ó 195 Dia||230.Dia||230||275 Dia||280 x 280||340 X 340||500||500|
|Base Working Area||200x200||220x220||220x220||275x275||275x275||310x320||370x370||460x480|
|Floor Area Required||355x210||420x240||420x240||500x300||500x300||685x410||740x480||880x575|
|No. of Speeds||ó 4||4||8||5||8||8||8||8|
|Spindle Speed with 1440 RPM Moter||725,1175,
ó 1880, 2950
1210, 1695, 2350
|540, 779, 1080,1490
450, 660, 980,1420
|Spindle Speed with 960 RPM Motor||530, 840,
805, 1130, 1568
|1190, 1150, 710, 380
|370, 530, 735, 990
|55, 95, 135, 185
335, 440, 735,1065
|160, 220, 300, 400,
520, 700, 925, 1225
|Total Height of Machine||870||970||1140||1230||1310||1700||1820||1875|
|V-Belt Size||A- 36||A- 39/38||A- 39/38||A- 44/43||A- 44143||8-52/51||B -57/56||B-62|
|Machine Weight without Electrical||40Kg.||65Kg.||85Kg.||100Kg.||110Kg.||210Kg.||310Kg.||475Kg.|
|Machine Weight packed without Electrical||rical 95 Kg.||108 Kg.||140 Kg.||160 Kg.||176 Kg.||285 Kg.||470 Kg.||640 Kg.|
|Auto Feed Rate||0.O4toOi mm/Rev.
Spare Pulley for motor.
Motor, Starter, Drill Chuck, Arbor, Sleves & V-belt
B-73, Phase-1, Mayapuri Industrial
Area, New Delhi - 110064